CENTRAL PHOENIX: (602) 266-8165

WEST VALLEY: (623) 772-0368

EAST VALLEY: (480) 659-2245

www.keepcoolaz.com

MD Mechanical 34 Point Spring Tune-Up/ Check-Up

  1. Check thermostat
  2. Start unit
  3. Check return air filter
  4. Check condensate drain
  5. Check condensate pan and fittings for leaks
  6. Check blower wheel
  7. Check blower motor stability
  8. Check blower motor amp draw
  9. Lube motors and bearings if required
  10. Check belt, pulleys and alignment
  11. Check total electrical consumption
  12. Examine parts for physical wear
  13. Check and secure all panels
  14. Examine all electrical connections
  15. Check unit disconnect switch
  16. Check temperature difference across coil
  17. Perform routine cleaning of condenser coil
  18. Check condenser fan motor stability
  19. Check condenser fan motor amp draw
  20. Check condenser fan blades for vibration
  21. Check reversing valve
  22. Check crank case heater
  23. Check relays and contactors
  24. Check capacitors
  25. Check all safety devices
  26. Test time delay
  27. Check defrost assembly
  28. Check all controls
  29. Test refrigeration metering device
  30. Measure operating pressure with gauges
  31. Check noise and vibration levels
  32. Check compressor amp draw
  33. Make final operations test
  34. Advise of improvements as needed

Click Here to Print                                                                            Click Here to Return to Website